Tolerancias Estándar Para Dimensiones de Resortes y Muelles

En Acxess Spring pretendemos fabricar sus resortes y muelles personalizados con precisión, ya que hay ciertas tolerancias estándar de la industria que se deben cumplir. A continuación encontrará una lista de todas las tolerancias estándar de muelles de compresión, muelles de extensión, muelles de torsión, resortes entrelazables, resortes cónicos y resortes de barril.

Tolerancias estándar para resortes de compresión:

tolerancias-estandar-dimensiones-resortes-compresion

Tolerancias de Diámetro Externo e Interno

  • 0.6350mm a 1.2700mm ± 0.0508mm
  • 1.2701mm a 2.5400mm ± 0.0762mm
  • 2.5401mm a 6.3500mm ± 0.1270mm
  • 6.3501mm a 12.700mm ± 0.2032mm
  • 12.701mm a 21.590mm ± 0.3810mm
  • 21.591mm a 28.575mm ± 0.5080mm
  • 28.576mm a 31.750mm ± 0.6350mm
  • 31.751mm a 37.592mm ± 0.7620mm
  • 37.593mm a 44.450mm ± 1.0160mm
  • 44.451mm a 50.800mm ± 1.3970mm
  • 50.801mm a 57.150mm ± 1.6510mm
  • 57.151mm a 63.500mm ± 1.9050mm
  • 63.501mm a 69.850mm ± 2.2860mm
  • 69.851mm a 76.200mm ± 2.9210mm
  • 76.201mm a 88.900mm ± 3.3020mm
  • 88.901mm a 101.60mm ± 4.0640mm
  • 101.61mm a 114.30mm ± 4.8260mm
  • 114.31mm a 127.00mm ± 5.7150mm
  • 127.01mm a 139.70mm ± 6.3500mm
  • 139.71mm a 152.40mm ± 7.1120mm
  • 152.41mm a 165.10mm ± 7.8740mm
  • 165.11mm a 177.80mm ± 8.8900mm
  • 177.81mm a 190.50mm ± 9.7790mm
  • 190.51mm a 203.20mm ± 10.541mm
  • 203.21mm a 215.90mm ± 11.557mm
  • 215.91mm a 228.60mm ± 12.446mm
  • 228.61mm a 241.30mm ± 13.335mm
  • 241.31mm a 254.00mm ± 14.351mm

Tolerancias de Diámetro de Alambre

Nota: Acxess Spring no fabrica el alambre utilizado para fabricar sus resortes.

Las siguientes tolerancias aplican para los siguientes tipos de alambre:

  • Hard Drawn HD A679
  • Hard Drawn ASTM A227
  • Music Wire ASTM A228
  • Oil Tempered MB A229
  • Carbon Valve A230
  • Phosphor Bronze Grade A B159
  • Beryllium Copper B197
  • Stainless Steel 17-7 ASTM A313
  • Stainless Steel 302 ASTM A313
  • Stainless Steel 316 ASTM A316
  • 0.1270mm a 0.4572mm ± 0.01270mm
  • 0.4573mm a 1.0160mm ± 0.01524mm
  • 1.0161mm a 1.5875mm ± 0.01778mm
  • 1.5876mm a 2.2860mm ± 0.02032mm
  • 2.2861mm a 3.1750mm ± 0.02286mm
  • 3.1751mm a 6.3500mm ± 0.02540mm
  • 6.3501mm a 9.5250mm ± 0.03175mm
  • 9.5251mm a 12.700mm ± 0.03493mm
  • 12.701mm a 15.875mm ± 0.03810mm

Las siguientes tolerancias aplican para los siguientes tipos de alambre:

  • Chrome Silicon A401
  • 5160 H
  • 2.5400mm a 3.1750mm ± 0.02286mm
  • 3.1751mm a 6.3500mm ± 0.02540mm
  • 6.3501mm a 9.5250mm ± 0.03175mm
  • 9.5251mm a 12.700mm ± 0.03493mm
  • 12.701mm a 15.875mm ± 0.03810mm
  • 15.876mm a 19.050mm ± 0.04064mm
  • 19.051mm a 31.750mm ± 0.04318mm

Tolerancias de Longitud Libre

  • 0.0254mm a 12.700mm ± 0.381mm
  • 12.701mm a 25.400mm ± 0.508mm
  • 25.401mm a 50.800mm ± 0.762mm
  • 50.801mm a 101.60mm ± 1.270mm
  • 101.61mm a 203.20mm ± 2.362mm
  • 203.21mm a 254.00mm ± 3.962mm
  • 254.01mm a 381.00mm ± 6.250mm
  • 381.01mm a 508.00mm ± 8.890mm
  • 508.01mm a 635.00mm ± 12.70mm
  • 635.01mm a 762.00mm ± 16.51mm
  • 762.01mm a 889.00mm ± 20.32mm
  • 889.01mm a 1016.0mm ± 25.40mm
  • 1016.1mm a 1219.2mm ± 31.75mm

Tolerancia de Número de Espirales

±¼ de espiral o hacer referencia si el constante o una fuerza requerida deben ser cumplidas.

Tolerancia de la Longitud Solida

±7% o hacer referencia si el constante o una fuerza requerida deben ser cumplidas.

Tolerancia del Constante (k)

±10%

Tolerancia de la Fuerza / Distancia Recorrida

±10%

Tolerancias de Diámetro Externo

  • 0.6350mm a 1.2700mm ± 0.0508mm
  • 1.2701mm a 2.5400mm ± 0.0762mm
  • 2.5401mm a 6.3500mm ± 0.1270mm
  • 6.3501mm a 12.700mm ± 0.2032mm
  • 12.701mm a 21.590mm ± 0.3810mm
  • 21.591mm a 28.575mm ± 0.5080mm
  • 28.576mm a 31.750mm ± 0.6350mm
  • 31.751mm a 37.592mm ± 0.7620mm
  • 37.593mm a 44.450mm ± 1.0160mm
  • 44.451mm a 50.800mm ± 1.3970mm
  • 50.801mm a 57.150mm ± 1.6510mm
  • 57.151mm a 63.500mm ± 1.9050mm
  • 63.501mm a 69.850mm ± 2.2860mm
  • 69.851mm a 76.200mm ± 2.9210mm
  • 76.201mm a 88.900mm ± 3.3020mm
  • 88.901mm a 101.60mm ± 4.0640mm
  • 101.61mm a 114.30mm ± 4.8260mm
  • 114.31mm a 127.00mm ± 5.7150mm
  • 127.01mm a 139.70mm ± 6.3500mm
  • 139.71mm a 152.40mm ± 7.1120mm
  • 152.41mm a 165.10mm ± 7.8740mm
  • 165.11mm a 177.80mm ± 8.8900mm

Tolerancias de Diámetro de Alambre

Nota: Acxess Spring no fabrica el alambre utilizado para fabricar sus resortes.

Las siguientes tolerancias aplican para los siguientes tipos de alambre:

  • Hard Drawn HD A679
  • Hard Drawn ASTM A227
  • Music Wire ASTM A228
  • Oil Tempered MB A229
  • Carbon Valve A230
  • Phosphor Bronze Grade A B159
  • Beryllium Copper B197
  • Stainless Steel 17-7 ASTM A313
  • Stainless Steel 302 ASTM A313
  • Stainless Steel 316 ASTM A316
  • 0.1270mm a 0.4572mm ± 0.01270mm
  • 0.4573mm a 1.0160mm ± 0.01524mm
  • 1.0161mm a 1.5875mm ± 0.01778mm
  • 1.5876mm a 2.2860mm ± 0.02032mm
  • 2.2861mm a 3.1750mm ± 0.02286mm
  • 3.1751mm a 6.3500mm ± 0.02540mm
  • 6.3501mm a 9.5250mm ± 0.03175mm
  • 9.5251mm a 12.700mm ± 0.03493mm
  • 12.701mm a 15.875mm ± 0.03810mm

Las siguientes tolerancias aplican para los siguientes tipos de alambre:

  • Chrome Silicon A401
  • 5160 H
  • 2.5400mm a 3.1750mm ± 0.02286mm
  • 3.1751mm a 6.3500mm ± 0.02540mm
  • 6.3501mm a 9.5250mm ± 0.03175mm
  • 9.5251mm a 12.700mm ± 0.03493mm
  • 12.701mm a 15.875mm ± 0.03810mm
  • 15.876mm a 19.050mm ± 0.04064mm
  • 19.051mm a 31.750mm ± 0.04318mm

Tolerancias de Longitud Entre Ganchos

  • 0.0254mm a 12.700mm ± 0.381mm
  • 12.701mm a 25.400mm ± 0.508mm
  • 25.401mm a 50.800mm ± 0.762mm
  • 50.801mm a 101.60mm ± 1.270mm
  • 101.61mm a 203.20mm ± 2.362mm
  • 203.21mm a 254.00mm ± 3.962mm
  • 254.01mm a 381.00mm ± 6.250mm
  • 381.01mm a 508.00mm ± 8.890mm
  • 508.01mm a 635.00mm ± 12.70mm
  • 635.01mm a 762.00mm ± 16.51mm
  • 762.01mm a 889.00mm ± 20.32mm
  • 889.01mm a 1016.0mm ± 25.40mm
  • 1016.1mm a 1219.2mm ± 31.75mm

Tolerancia del Constante (k)

±10%

Tolerancia de la Fuerza / Distancia Recorrida

±10%

Tolerancia de Tensión Inicial

Hacer referencia

Tolerancias de Diámetro Externo e Interno

  • 0.6350mm a 1.2700mm ± 0.0508mm
  • 1.2701mm a 2.5400mm ± 0.0762mm
  • 2.5401mm a 6.3500mm ± 0.1270mm
  • 6.3501mm a 12.700mm ± 0.2032mm
  • 12.701mm a 21.590mm ± 0.3810mm
  • 21.591mm a 28.575mm ± 0.5080mm
  • 28.576mm a 31.750mm ± 0.6350mm
  • 31.751mm a 37.592mm ± 0.7620mm
  • 37.593mm a 44.450mm ± 1.0160mm
  • 44.451mm a 50.800mm ± 1.3970mm
  • 50.801mm a 57.150mm ± 1.6510mm
  • 57.151mm a 63.500mm ± 1.9050mm
  • 63.501mm a 69.850mm ± 2.2860mm
  • 69.851mm a 76.200mm ± 2.9210mm
  • 76.201mm a 88.900mm ± 3.3020mm
  • 88.901mm a 101.60mm ± 4.0640mm
  • 101.61mm a 114.30mm ± 4.8260mm
  • 114.31mm a 127.00mm ± 5.7150mm
  • 127.01mm a 139.70mm ± 6.3500mm
  • 139.71mm a 152.40mm ± 7.1120mm
  • 152.41mm a 165.10mm ± 7.8740mm
  • 165.11mm a 177.80mm ± 8.8900mm
  • 177.81mm a 190.50mm ± 9.7790mm
  • 190.51mm a 203.20mm ± 10.541mm
  • 203.21mm a 215.90mm ± 11.557mm
  • 215.91mm a 228.60mm ± 12.446mm
  • 228.61mm a 241.30mm ± 13.335mm
  • 241.31mm a 254.00mm ± 14.351mm

Tolerancias de Diámetro de Alambre

Nota: Acxess Spring no fabrica el alambre utilizado para fabricar sus resortes.

Las siguientes tolerancias aplican para los siguientes tipos de alambre:

  • Hard Drawn HD A679
  • Hard Drawn ASTM A227
  • Music Wire ASTM A228
  • Oil Tempered MB A229
  • Carbon Valve A230
  • Phosphor Bronze Grade A B159
  • Beryllium Copper B197
  • Stainless Steel 17-7 ASTM A313
  • Stainless Steel 302 ASTM A313
  • Stainless Steel 316 ASTM A316
  • 0.1270mm a 0.4572mm ± 0.01270mm
  • 0.4573mm a 1.0160mm ± 0.01524mm
  • 1.0161mm a 1.5875mm ± 0.01778mm
  • 1.5876mm a 2.2860mm ± 0.02032mm
  • 2.2861mm a 3.1750mm ± 0.02286mm
  • 3.1751mm a 6.3500mm ± 0.02540mm
  • 6.3501mm a 9.5250mm ± 0.03175mm
  • 9.5251mm a 12.700mm ± 0.03493mm
  • 12.701mm a 15.875mm ± 0.03810mm

Las siguientes tolerancias aplican para los siguientes tipos de alambre:

  • Chrome Silicon A401
  • 5160 H
  • 2.5400mm a 3.1750mm ± 0.02286mm
  • 3.1751mm a 6.3500mm ± 0.02540mm
  • 6.3501mm a 9.5250mm ± 0.03175mm
  • 9.5251mm a 12.700mm ± 0.03493mm
  • 12.701mm a 15.875mm ± 0.03810mm
  • 15.876mm a 19.050mm ± 0.04064mm
  • 19.051mm a 31.750mm ± 0.04318mm

Tolerancia de Longitud de las Piernas

  • 0.508mm a 1.270mm ± 0.254mm
  • 1.271mm a 6.350mm ± 0.635mm
  • 6.351mm a 25.40mm ± 0.889mm
  • 25.41mm a 50.80mm ± 1.270mm
  • 50.81mm a 101.6mm ± 2.032mm
  • 101.7mm a 190.5mm ± 3.810mm
  • 190.6mm a 254.0mm ± 6.985mm

Tolerancia de Número de Espirales / Posición Libre

±3/16 de un espiral

Tolerancia del Constante (k)

S±10%

Tolerancia del Torque

±10%

Diámetro exterior / interior pequeño y grande

  • 0.6350mm a 1.2700mm ± 0.0508mm
  • 1.2701mm a 2.5400mm ± 0.0762mm
  • 2.5401mm a 6.3500mm ± 0.1270mm
  • 6.3501mm a 12.700mm ± 0.2032mm
  • 12.701mm a 21.590mm ± 0.3810mm
  • 21.591mm a 28.575mm ± 0.5080mm
  • 28.576mm a 31.750mm ± 0.6350mm
  • 31.751mm a 37.592mm ± 0.7620mm
  • 37.593mm a 44.450mm ± 1.0160mm
  • 44.451mm a 50.800mm ± 1.3970mm
  • 50.801mm a 57.150mm ± 1.6510mm
  • 57.151mm a 63.500mm ± 1.9050mm
  • 63.501mm a 69.850mm ± 2.2860mm
  • 69.851mm a 76.200mm ± 2.9210mm
  • 76.201mm a 88.900mm ± 3.3020mm
  • 88.901mm a 101.60mm ± 4.0640mm
  • 101.61mm a 114.30mm ± 4.8260mm

Tolerancias de Diámetro de Alambre

Nota: Acxess Spring no fabrica el alambre utilizado para fabricar sus resortes.

Las siguientes tolerancias aplican para los siguientes tipos de alambre:

  • Hard Drawn HD A679
  • Hard Drawn ASTM A227
  • Music Wire ASTM A228
  • Oil Tempered MB A229
  • Carbon Valve A230
  • Phosphor Bronze Grade A B159
  • Beryllium Copper B197
  • Stainless Steel 17-7 ASTM A313
  • Stainless Steel 302 ASTM A313
  • Stainless Steel 316 ASTM A316
  • 0.1270mm a 0.4572mm ± 0.01270mm
  • 0.4573mm a 1.0160mm ± 0.01524mm
  • 1.0161mm a 1.5875mm ± 0.01778mm
  • 1.5876mm a 2.2860mm ± 0.02032mm
  • 2.2861mm a 3.1750mm ± 0.02286mm
  • 3.1751mm a 6.3500mm ± 0.02540mm
  • 6.3501mm a 9.5250mm ± 0.03175mm
  • 9.5251mm a 12.700mm ± 0.03493mm
  • 12.701mm a 15.875mm ± 0.03810mm

Las siguientes tolerancias aplican para los siguientes tipos de alambre:

  • Chrome Silicon A401
  • 5160 H
  • 2.5400mm a 3.1750mm ± 0.02286mm
  • 3.1751mm a 6.3500mm ± 0.02540mm
  • 6.3501mm a 9.5250mm ± 0.03175mm
  • 9.5251mm a 12.700mm ± 0.03493mm
  • 12.701mm a 15.875mm ± 0.03810mm
  • 15.876mm a 19.050mm ± 0.04064mm
  • 19.051mm a 31.750mm ± 0.04318mm

Tolerancias de Longitud Libre

  • 0.0254mm a 12.700mm ± 0.381mm
  • 12.701mm a 25.400mm ± 0.508mm
  • 25.401mm a 50.800mm ± 0.762mm
  • 50.801mm a 101.60mm ± 1.270mm
  • 101.61mm a 203.20mm ± 2.362mm
  • 203.21mm a 254.00mm ± 3.962mm
  • 254.01mm a 381.00mm ± 6.250mm
  • 381.01mm a 508.00mm ± 8.890mm
  • 508.01mm a 635.00mm ± 12.70mm
  • 635.01mm a 762.00mm ± 16.51mm
  • 762.01mm a 889.00mm ± 20.32mm
  • 889.01mm a 1016.0mm ± 25.40mm
  • 1016.1mm a 1219.2mm ± 31.75mm

Tolerancia de Número de Espirales

±¼ de espiral o hacer referencia si el constante o una fuerza requerida deben ser cumplidas.

Tolerancia de la Fuerza / Distancia Recorrida

±10%

Tolerancias de Diámetro Externo del Resorte de Tensión

  • 0.6350mm a 1.2700mm ± 0.0508mm
  • 1.2701mm a 2.5400mm ± 0.0762mm
  • 2.5401mm a 6.3500mm ± 0.1270mm
  • 6.3501mm a 12.700mm ± 0.2032mm
  • 12.701mm a 21.590mm ± 0.3810mm
  • 21.591mm a 28.575mm ± 0.5080mm
  • 28.576mm a 31.750mm ± 0.6350mm
  • 31.751mm a 37.592mm ± 0.7620mm
  • 37.593mm a 44.450mm ± 1.0160mm
  • 44.451mm a 50.800mm ± 1.3970mm
  • 50.801mm a 57.150mm ± 1.6510mm
  • 57.151mm a 63.500mm ± 1.9050mm
  • 63.501mm a 69.850mm ± 2.2860mm
  • 69.851mm a 76.200mm ± 2.9210mm
  • 76.201mm a 88.900mm ± 3.3020mm
  • 88.901mm a 101.60mm ± 4.0640mm
  • 101.61mm a 114.30mm ± 4.8260mm
  • 114.31mm a 127.00mm ± 5.7150mm
  • 127.01mm a 139.70mm ± 6.3500mm
  • 139.71mm a 152.40mm ± 7.1120mm
  • 152.41mm a 165.10mm ± 7.8740mm
  • 165.11mm a 177.80mm ± 8.8900mm



Tolerancias de Diámetro Externo del Resorte Entrelazable

  • 76.20mm a 127.0mm ± 6.350mm
  • 127.1mm a 190.5mm ± 9.525mm
  • 190.6mm a 254.0mm ± 12.70mm
  • 254.1mm a 317.5mm ± 19.05mm
  • 317.6mm a 381.0mm ± 22.23mm
  • 381.1mm a 508.0mm ± 25.40mm
  • 508.1mm a 635.0mm ± 31.75mm
  • 635.1mm a 762.0mm ± 38.10mm


Tolerancias de Longitud

  • 0.0254mm a 12.700mm ± 0.381mm
  • 12.701mm a 25.400mm ± 0.508mm
  • 25.401mm a 50.800mm ± 0.762mm
  • 50.801mm a 101.60mm ± 1.270mm
  • 101.61mm a 203.20mm ± 2.362mm
  • 203.21mm a 254.00mm ± 3.962mm
  • 254.01mm a 381.00mm ± 6.250mm
  • 381.01mm a 508.00mm ± 8.890mm
  • 508.01mm a 635.00mm ± 12.70mm
  • 635.01mm a 762.00mm ± 16.51mm
  • 762.01mm a 889.00mm ± 20.32mm
  • 889.01mm a 1016.0mm ± 25.40mm
  • 1016.1mm a 1219.2mm ± 31.75mm


Tolerancia del Constante (k)

±10%

Tolerancia de Diámetro de alambre

Nota: Acxess Spring no fabrica el alambre utilizado para fabricar sus resortes.

Las siguientes tolerancias aplican para los siguientes tipos de alambre:

  • Hard Drawn HD A679
  • Hard Drawn ASTM A227
  • Music Wire ASTM A228
  • Oil Tempered MB A229
  • Carbon Valve A230
  • Phosphor Bronze Grade A B159
  • Beryllium Copper B197
  • Stainless Steel 17-7 ASTM A313
  • Stainless Steel 302 ASTM A313
  • Stainless Steel 316 ASTM A316
  • 0.005” a 0.018” ± 0.0005”
  • 0.019” a 0.040” ± 0.0006”
  • 0.041” a 0.0625” ± 0.0007”
  • 0.063” a 0.090” ± 0.0008”
  • 0.091” a 0.125” ± 0.0009”
  • 0.126” a 0.250” ± 0.001”
  • 0.251” a 0.375” ± 0.00125”
  • 0.376” a 0.500” ± 0.001375”
  • 0.501” a 0.625” ± 0.0015”

Las siguientes tolerancias aplican para los siguientes tipos de alambre:

  • Chrome Silicon A401
  • 5160 H
  • 0.100” a 0.125” ± 0.0009”
  • 0.126” a 0.250” ± 0.001”
  • 0.251” a 0.375” ± 0.00125”
  • 0.376” a 0.500” ± 0.001375”
  • 0.501” a 0.625” ± 0.0015”
  • 0.626” a 0.750” ± 0.0016”
  • 0.751” a 1.250” ± 0.0017”