Banner Instant Spring Quote Spring Creator Spring Calculator Spring Finder
  • Compare Products ()
  • Sign In
  • Create an Account
Toggle Nav
My Cart 0
Search
Advanced Search
(951) 276-2777sales@acxesspring.com
Menu
Account

Attention! Input results shown will be +/- 10% from middle value. Hint: The closer your min and max inputs are, the more accurate your results will be!

Outer Diameter:

to

inches mm

Inner Diameter:

to

inches mm

Free Length:

to

inches mm

Wire Diameter:

to

inches mm

Total Coils:

to

Rate: ? Spring rate or spring constant: The amout of force required to move the spring 1 inch of distance or in millimeters the amount of force required to move the spring 1 millimeter of distance.

to

lbs/in N/mm

Info! Please fill in one or more fields to narrow down your search.

Max. Load: ? The maximum amount of force or load you can place on this spring. If you put more force than this you will distort or fatigue the spring.

to

lbs N

Max. Deflection (Max. Travel):

to

inches mm

Solid Height:

to

inches mm

* Required Field

Attention! Input results shown will be +/- 10% from middle value. Hint: The closer your min and max inputs are, the more accurate your results will be!

Outer Diameter:

to

inches mm

Length Inside Hook:

to

inches mm

Wire Diameter:

to

inches mm

Info! Please fill in one or more fields to narrow down your search.

Max. Load: ? The maximum amount of force or load you can place on this spring. If you put more force than this you will distort or fatigue the spring.

to

lbs N

Max. Deflection (Max. Travel):

to

inches mm

Initial Tension: ? The force required to seperate the coils of an extension spring before the spring will extend.

to

lbs N

Rate: ? Spring rate or spring constant: The amout of force required to move the spring 1 inch of distance or in millimeters the amount of force required to move the spring 1 millimeter of distance.

to

lbs/in N/mm

* Required Field

Attention! Input results shown will be +/- 10% from middle value. Hint: The closer your min and max inputs are, the more accurate your results will be!

Outer Diameter:

to

inches mm

Inner Diameter:

to

inches mm

Free Position or Leg Position in degrees: ? Free Position or Leg Position in degrees

degrees

Total Coils:

to

Wire Diameter:

to

inches mm

Body Length:

to

inches mm

Info! Please fill in one or more fields to narrow down your search.

Max. Torque: ? The amount of force applied to a torsion spring to radially move the springs leg a certain amount of degrees.

to

lbs N

Max. Deflection (Degrees of travel):

to

degrees

Rate: ? Torsion spring rate is the amount of radial force required to move the spring 360 degrees of distance. Divide the spring rate by 360 degrees to get the rate per degree

to

in-lbs./deg. N-mm/deg.

Leg Length: ? Both legs are equal in length

to

inches mm

* Required Field

Attention! Input results shown will be +/- 10% from middle value. Hint: The closer your min and max inputs are, the more accurate your results will be!

Small Outer Diameter:

to

inches mm

Large Outer Diameter:

to

inches mm

Free Length:

to

inches mm

Info! Please fill in one or more fields to narrow down your search.

Rate: ? Spring rate or spring constant: The amout of force required to move the spring 1 inch of distance or in millimeters the amount of force required to move the spring 1 millimeter of distance.

to

lbs/in N/mm

Total Coils:

to

Solid Height:

to

inches mm

Wire Diameter:

to

inches mm

How to use our stock 3D CAD Extension Spring Drawings

How to use our stock 3D CAD Extension Spring Drawings

How to use our stock 3D CAD Extension Spring Drawings


How to use our stock 3D CAD Extension Spring Drawings


Acxess Spring is celebrating 25 years, in honor of this we have created 3D CAD drawings for all our 40,000 Stock Springs online. This means, FREE 3D CAD Drawings for all stock Compression Springs, Extension Springs, Torsion Springs, Conical Springs and Coil Springs. As happy as we are about sharing our 3D CAD drawings with you, we are also excited to share this step by step guide on how to properly use them. This way you can take full advantage of our amazing Stock 3D Torsion Spring CAD Drawings. In the following article you will find a step by step guide to ensure you obtain your 3D CAD drawing.

Step 1. Go to The Spring Store

Step 1 The Spring Store Extension Springs

Step 2. Enter your ideal spring dimensions. For example: Outer Diameter, Free Length and the Rate

As Ideal Extension Spring Dimension

Step3. Click on the search button

AS Extension Search Button

Step 4: Scroll down and you will see a table with all of the spring options within the range you searched for.

AS Scroll Down Extension Spring Options

Step 5: Choose the stock extension spring that would be the best fit for your design or project.

AS Choose Your Stock extension Spring

Step 6: Click on the red 3D CAD/ SPECS icon.

AS Click On The Red 3D Extension CAD Icon

Step 7: You will get a pop up of a 3d cad drawing for the extension spring you chose (make sure you disable your Pop Up Blocker for downloads)

AS Pop Up 3D Extension CAD Drawings

Step 8: On the 360 view there will be 8 cubes on the right hand side, these cubes are the different angles of the extension springs.

AS Extension 3D View Spring

Step 9: On the pop up you will see the part number at the top and at the bottom you will see 3 buttons and a file type box.

AS Pop Up Stock Extension Spring

Step 10: The first box is for you to choose the file type in which you would like to download your 3D CAD Drawing: Creo 4.0, STEP, IGES, 3D Viewer or Parasolid.

AS Choose Extension File Type

Step 11: Once you have chosen your file type you will see the button “Download CAD” . Go ahead and click on it so that your 3D cad file downloads.

AS Download Extension CAD

Step 12: Next under the first button you will see the Spec Sheet/Blueprint button. Here you will find a detailed spec sheet and 3D blueprint of your extension spring.

AS Extension Spec Sheet Blueprint Button

Step 13: The last button on the pop up is the View 3D Model tab. This button takes you to a bigger view of the 3D CAD Drawing before you download it. With this view as well as the quick pop up view you can see your 3D extension spring in various different angles as if you were holding it rite in front of you.

AS Extension View 3D Model tab

Step 14: Once you have viewed your 3D Extension spring on the Pop Up from the table of results you can click on the part number on the left of the table. By clicking on the Part number in the search table it will take you to the product page which shows all the pricing options for both unitary and higher quantity pricing as well as all the specifications for your spring.

AS Extension Click On The Part Number

Step 15: Select the amount of extension springs you are interested in purchasing whether it's 5 or a bulk purchase and add to the cart.

AS Select Amount Of Extension Springs

Step 16: Once you have selected your springs go to your cart and click on “Go To Checkout.”

AS Extension Go To Checkout

Step 17: Enter all of your shipping information and choose your preferred shipping method.

AS Extension Shipping Information

Step 18: Enter your payment method information. (Please review that all of your shipping and payment method information is correct.)

AS Extension Payment Method

Step 19: Place your stock extension spring order.

AS Place Stock Extension Spring Order


3D Stock Extension Spring CAD Drawings

There are many spring specifications to be considered when buying a stock extension spring , this is why we recommend that you view the stock spring with our 3D Viewer to make sure it looks like the spring you're replacing. You can also download our stock spring 3D CAD files and put our file into your 3D software to make sure it will fit into your new product or device. This new technology will help you make an intelligent decision before purchasing stock springs and also save you time because you won't have to wait for the test springs to arrive. If you are having issues deciding whether the spring you find in our stock will work or not , don’t hesitate to contact us at: (951) 276-2777