search
Loading...
Compression Springs Compression Springs

Enter your Outside Diameter and Free Length
Hint: For larger search results, enter a bigger range of Min and Max Inputs

Outside Diameter
to
Inside Diameter
to
Free Length
to
Wire Diameter
to
Total Coils
to
Rate
to
Material Type
Max. Load
to
Max. Deflection
to
Solid Height
to
*Required Field
Extension Springs Extension Springs

Enter your Outside Diameter and Length Inside Hook
Hint: For larger search results, enter a bigger range of Min and Max Inputs

Outside Diameter
to
Length Inside Hook
to
Wire Diameter
to
Max. Load
to
Max. Deflection
to
Initial Tension
to
Rate
to
Material Type
*Required Field
Torsion Springs Torsion Springs

Enter your Outside Diameter and Total Coils
Hint: For larger search results, enter a bigger range of Min and Max Inputs

Outside Diameter
to
Inside Diameter
to
Total Coils
to
Free Position
to
Wire Diameter
to
Body Length
to
Max. Torque
to
Max. Deflection
to
Rate
to
Leg Length
to
Material Type
*Required Field
Conical Springs Conical Springs

Enter you Small Outside Diameter, Large Outside Diameter and Free Length
Hint: For larger search results, enter a bigger range of Min and Max Inputs

Small Outside Diameter
to
Large Outside Diameter
to
Free Length
to
Rate
to
Total Coils
to
Solid Height
to
Wire Diameter
to
Material Type
*Required Field

Torsion Springs Nomenclature

Definition: Torsion springs are tightly coiled round wires with straight wires coming off the ends which make the legs of the torsional spring.

Note: Click on the highlighted titles to learn more.

 

Torsional Spring

Another term used for torsion springs.

 

Direction of Wind

The direction in which your spring’s coils are wound. Learn how to determine the direction of wind using the diagram to the right.

 

Free Position

The angle of your spring’s legs in a free state.

 

Wire Diameter

Measurement of wire thickness.

 

Outer Diameter

Measurement of the width of the coils that make up the torsion spring’s body.

 

Inner Diameter

Measurement of the hole inside the spring’s coils formed by its helical shape.

 

Mean Diameter

The medium or intermediate diameter between the outer and inner diameter. Calculated by adding one wire diameter to the inner diameter or subtracting one wire diameter from the outer diameter.

 

Index

The proportional ratio between a spring’s wire diameter and mean diameter. It describes the tightness of the spring’s coils.

 

Body Length

The body length is the measurement of the body’s height. You may calculate the body length by multiplying the total coils by the wire diameter and adding one additional wire diameter.

 

Leg Lengths

The length of your torsion spring’s legs, staring from the center of its outer diameter. You can measure the leg lengths from the outside of the outer diameter and then add half of the outer diameter to that measurement.

 

Typical Legs (Typ.)

This means that both legs are the same length.

 

Active / Total Coils

The total amount of active coils in a torsion spring that’ll work together to fulfill your torque and deflection requirements.

 

Rate (Constant) per Degree

The constant amount of force it will take the spring to travel one degree at a time.

 

Rate (Constant) per 360 Degrees

The constant amount of force it will take the spring to travel 360 degrees.

 

Torqued Position

Angle of the position of the spring’s legs when a load is applied.

 

Degrees of Travel (Degrees of Deflection)

The angular motion in which a torsional spring is torqued or rotated. The degrees of travel are calculated by subtracting the torqued position from the free position.

 

Torque

The weight or force being applied on the spring’s legs in order for it to reach a torqued position.

 

Maximum Torque Possible

The maximum amount of torque your spring will be able to undergo before taking a permanent set.

 

Maximum Safe Travel

The maximum amount of angular travel or deflection your spring is able to achieve before taking a permanent set.

 

Endurance Limit

Maximum Stress at which your extension spring will perform indefinitely without failure for a given minimum stress limit.

 

Permanent Set

The product of exceeding the elastic properties of an extension spring thus keeping it from returning to its original unloaded length once the load has been released.

Torsional Springs NomenclatureTorsional Springs Nomenclature

 

Torsion Springs Physical Dimensions Nomenclature

 

Torsional Springs Physical Dimensions NomenclatureTorsional Springs Physical Dimensions Nomenclature