Wire Sizes

Compression Springs = 0.006 Wire Diameter to 1.00 inch Wire Diameter
Extension Springs = 0.006 Wire Diameter to 1.00 inch in Wire Diameter
Torsion Springs = 0.006 Wire Diameter to 1.00 inch in Wire Diameter

Double Torsion = 0.015 Wire Diameter to 0.100 Wire Diameter
Magazine Springs = 0.006 Wire Diameter to 0.080 Wire Diameter
Conical Springs = 0.006 Wire Diameter to 0.098 Wire Diameter
Micro Springs = 0.006 Wire Diameter to 0.025 Wire Diameter
Spring Rings = 0.006 Wire Diameter to 1.00 inch in Wire Diameter
Wire Forms = 0.006 Wire Diameter to 0.150 Wire Diameter
Garter Springs = 0.006 Wire Diameter to 0.098 Wire Diameter
Medical Springs = 0.006 Wire Diameter to 0.100 Wire Diameter

Design Your Spring With Our Spring Calculator!

                        Click The Calculator To Get Started

Wire Types

Acxess Spring manufactures springs from a variety of spring temper wire
We specialize in:
      -Music Wire ASTM A 228

           -pre-zinc coated music wire

           -tinned music wire

      -Carbon valve ASTM A 230

      -Oil Tempered ASTM A 229

      -Hard Drawn ASTM A 227

      -Galvanized Hard Drawn

      -Stainless Steel
           -302 / 304 (ASTM A 313)  316 (ASTM A 313)  17-7 (ASTM A 313)
      -Phosphor Bronze ASTM B 159

      -Beryllium Copper ASTM B 197
      -Chrome Silicone ASTM A 401

      -Chrome Vanadium ASTM A 231

If there is a type of wire that your would like special requested for your
spring please call Acxess Spring at (951) 276-2777 and allow for longer
lead time.  

 Acxess Spring offers a variety of plating options for all its spring orders

     -Zinc Plating (blue, yellow, and black)

     -Nickle Plating

     -Gold Electroplating

     -Powder Coating

     -Black Oxide (oil and wax)

    -Passivated (on stainless steel)

If there is a plating option you wish to have on your spring and you do not see if here please contact Acxess Spring at (951) 276-2777 and we would be happy to accommodate your request. 

Secondary Spring Operations

Most custom springs require some secondary operations to be completed
Some of the secondary operations offered at Acxess Spring can be found below
    -Grinding
    -Bending

    -Straight and Cut Wire Lengths
    -Cuts
    -Loops and hooks
    -Heat Treating

    -Forming

    -End Chamfering

If there is a secondary operation that you do not see here please call our engineers at (951) 276-2777

Here at Acxess Spring we have skilled engineers with many years of

experience engineering springs.  We are one of the few spring manufacturers who find it necessary to work with each individual customer to make sure their spring is perfectly engineered for their application. 

We run a full analysis of your spring and email it to you with every quote.  We will work with you on perfecting an existing design to minimize failure or on designing a new spring from the ground up.  Our engineers will save you time and money with the knowledge they have learned over almost 50 years of spring design. 

      Design Your Spring With Our Spring Calculator!

                             Click On The Calculator To Get Started

Spring Prototypes

One thing that many of our customers say sets Acxess Spring apart from its competitors is our willingness to help you in the prototype and sample stage of production.  We know it takes time to gain the trust of a customer and we intend to gain trust from you.  We offer FREE samples or prototypes (with a pending PO) on the following springs:

     -Compression Springs with no grind

     -Extension Springs with crossover hooks

     -Torsion Springs with no bends on the legs

     -Wire Rings

     -Conical Compression Springs with no grind

If there is something you do not see on this list please contact one of the Acxess Spring engineers at (951) 276-2777 to see if your spring qualifies for this service.