Identify a Coil Spring’s Direction of Wind
Determining the direction of wind for coil compression springs can be critical to the design and functioning of your application or project. In some cases, getting the wrong direction of wind will make your springs useless. A particular case is explained below, along with instructions and diagrams on how to determine the direction of wind for compression springs.
There are cases in which two coil springs are required to work together to improve force, yet keep the same elasticity and/or reduce solid height. To do this, you place a compression spring inside the inner diameter of a larger compression spring. In this case the direction of wind assures that the two springs don't intertwine thus allowing them to compress and decompress effectively. The direction of wind of the spring inside the other spring must be opposite. This meaning that a left-handed compression spring can be placed inside a right-handed compression spring.
Determining the Direction of Wind
To determine a coil spring's wind direction you must use the front coil. First, position the front coil so that the tip of the wire is at 12 o'clock. Then, check the direction in which the wire turns to make the first coil. If it goes clockwise, it's a right-hand spring, if it coils counter-clockwise, the spring is left-handed.
In our previous post, we talk about identifying a torsion spring's wind direction. For more design tips, visit our Tech Info page or follow us on Facebook for updates on new articles. If you need engineering help, feel free to contact our team.
What are you waiting for? Give us your device's requirements and we will put a spring on it!